Well Connected
Living room with a wall-mounted TV, no visible cables and a floating media console

Clean Craftsmanship · Terre Haute, Indiana

Flush TV wall mounting & in-wall wire concealment in Terre Haute

Stud-anchored precision, zero visible cables, and dual-gang in-wall power kits rated for in-wall use. Engineered for drywall, historic plaster walls, and brick fireplaces across Terre Haute and the Wabash Valley.

  • In-Wall Power Kits
  • Laser Precision Leveling
  • Plaster & Brick Walls
  • Audio & Remote Setup

Architectural Integrity

The 4 Rules of Clean Craftsmanship

In-Wall Power Kits

No drop cords. No exterior plastic raceways unless requested. We install dual-gang in-wall power kits rated for in-wall use, putting a recessed outlet behind your screen instead of running a power cord through the wall.

Solid Substrate & Structural Anchoring

We never rely on hollow drywall anchors for heavy screens. We locate physical structural studs using magnetic deep-field sensors. For fireplaces and brick surfaces, we utilize high-tensile masonry sleeve anchors that lock permanently into solid material.

Ultra High Speed HDMI 2.1 & eARC

We route full-bandwidth 48Gbps HDMI 2.1 in-wall cables capable of driving uncompressed 4K at 120Hz for gaming consoles and Dolby Atmos audio pass-through directly to soundbars via enhanced Audio Return Channel (eARC).

Acoustic Calibration & Single-Remote Simplicity

An installation is not finished when the TV is on the wall. We tune soundbars (Sonos Trueplay / Bose audio calibration), synchronize Apple TV or Roku remotes so you control volume and power with one button, and leave custom laminated cheat sheets.

TV wall mount being installed with an in-wall power kit and laser level

Electrical Safety & Indiana Building Codes

Why We Refuse to Drop Appliance Cords Behind Drywall

Many amateur installers drop the TV’s factory power cord into a hole in the drywall down to a floor outlet. Regular power cords are not made to be run inside a wall.

Flexible appliance cords are not rated for enclosed thermal environments. If trapped in insulation or subjected to heat, they can overheat, degrade or short-circuit.

The Well Connected Standard: We install an in-wall power kit rated for in-wall use, with in-wall-rated NM-B cable inside. It puts an outlet directly behind the screen, fed from the existing outlet below, without cutting into your main breaker panel.

30-Day Workmanship Promise: If something Martin installed isn’t working right within 30 days because of his workmanship, he comes back and fixes it at no charge. Hardware defects go to the manufacturer’s warranty.

Service Coverage Area

Mobile On-Site Service Throughout the Wabash Valley

We bring all commercial brackets, power bridge hardware, masonry anchors, and digital laser tools directly to your residence or business.

Indiana CoreTerre HauteVigo County (Primary)
IndianaWest Terre HauteWabash Riverfront
IndianaBrazil & Clay CityClay County
IndianaClinton & CayugaVermillion County
IndianaGreencastlePutnam County
IndianaSullivan & FarmersburgSullivan County
Illinois BorderParisEdgar County
Illinois BorderMarshall & MartinsvilleClark County
Illinois BorderRobinsonCrawford County
Illinois BorderCharlestonColes County

Transparent Investment Architecture

Fixed-Price Packages. Zero Hidden Fees.

We bring everything directly to your home and quote one all-inclusive price.

Tier 1 · Standard Drywall

Standard Clean Mount

Ideal for primary bedrooms and standard living rooms with drywall and wood studs.

$299

All-inclusive turnkey installation

  • Standard wood studs and drywall
  • Heavy-duty slim tilting wall bracket included
  • In-wall power kit rated for in-wall use
  • 2x Ultra High Speed 48Gbps HDMI 2.1 in-wall cables
  • Precision laser leveling & HEPA dust containment
Most popular Tier 2 · Showroom Grade

Architectural Flush & Articulated

For large screens, full-motion multi-angle viewing, soundbar integration, and gaming setups.

$449

Complete entertainment center integration

  • Everything in Standard Clean Mount
  • Heavy-duty dual-arm full-motion articulating bracket
  • Dual-outlet recessed power bridge (supports TV + Soundbar/Apple TV)
  • In-wall soundbar mounting with precision gapless alignment
  • Sonos / Bose speaker level setup & eARC audio check
  • Laminated remote cheat sheet & full family demonstration
Tier 3 · Specialty Surfaces

Masonry & Fireplace Specialist

Engineered for brick fireplaces, cultured stone facades, ceramic tile, or historic plaster & lath walls.

$479

Specialized masonry tooling & structural anchors

  • Mounting on real brick, natural stone, tile, or historic plaster & lath
  • Rotary hammer drilling & Tapcon masonry screws or sleeve anchors
  • Architectural painted raceway or mortared discreet cable channel
  • Heat check above the fireplace before mounting
  • Heavy-duty pull-down or multi-position mantle mount compatible
Owner On-SiteMartin leads every install
In-Wall Power KitNo power cords inside the wall
All Hardware IncludedBrackets, Romex & HDMI 2.1
Dust ContainmentHEPA vacuum at the wall

Prices are starting points for a typical job. You get a free assessment and a fixed written quote before any work begins. Need more than one service? Build a combined quote.

Current offers

  • Founding-customer pricing15% off for our first 20 bookings, applied on your written quote.
  • 30-day workmanship promiseIf something Martin installed or built isn’t working right within 30 days because of his workmanship, he comes back and fixes it at no charge. Hardware defects go to the manufacturer’s warranty.
  • Free assessmentA free look at the home or business and a fixed written quote before any work.

Frequently Asked Questions

Everything You Need to Know

Can you mount a TV over a brick or stone fireplace?

Yes. We bring industrial rotary hammer drills and masonry anchor systems specifically calibrated for brick, mortar joints, and cultured stone facades. We ensure perfect leveling and can route cables discreetly around the mantle or down through mortar channels.

How do you hide wires in historic homes with plaster and lath walls?

Older Terre Haute homes built with plaster and wood lath present unique challenges because plaster easily cracks under improper drilling and blocks standard stud finders. We use magnetic deep-field sensor technology to map structural wood framing and specialized fine-toothed cutting tools to create surgically clean openings that preserve the historic wall.

Do I need to buy brackets or cables beforehand?

You don’t have to worry about anything. We stock professional slim-profile tilting brackets, full-motion articulating heavy-duty arms, in-wall power kits, and 48Gbps Ultra High Speed HDMI 2.1 cables directly in our work vehicle.

Do you provide in-person patient instructions on how to use everything?

Absolutely. We never pack our tools until you are completely comfortable using your TV, soundbar, and streaming apps. For family members and seniors, we provide custom laminated large-print cheat sheets outlining exactly which buttons to press.

How much does it cost to mount a TV?

A standard clean mount on drywall and wood studs is $299. An architectural flush or full-motion articulated mount is $449. Wire concealment and the in-wall power kit are included in every package. Mounting on brick, stone, tile or historic plaster and lath is our Masonry and Fireplace Specialist tier at $479. Your final price depends on your TV size, the mount style you choose and your wall type. Every job starts with a free assessment, and you get a fixed written quote before any work begins.

What are your hours?

We are open Monday to Saturday, 8:00 AM to 7:00 PM; closed on Sundays. Call or text (812) 648-0126 to book a free assessment.

Ready to Connect Your Room with Zero Visible Wires?

Contact Martin directly. No call centers, no subcontractors, just unhurried craftsmanship and clean execution.